โคมไฟฉุกเฉิน – Sunny Emergency Light https://sunnyemergencylight.com/en/ Thu, 27 Nov 2025 04:49:37 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://sunnyemergencylight.com/wp-content/uploads/2020/12/cropped-FavIcon-1.webp โคมไฟฉุกเฉิน – Sunny Emergency Light https://sunnyemergencylight.com/en/ 32 32 SGM Series https://sunnyemergencylight.com/en/product/sgm-series/ Fri, 18 Dec 2020 10:36:53 +0000 https://sunnyemergencylight.com/product/mem-series/ Bulb
  • Highly efficient and super bright 9 Watts LEDs provides maximum brightness while saving on power consumption. It also offers long operational life of more than 50,000 hours
Battery
  • Use Lithium Iron Phosphate (LiFePO4) 3.2V-6000mAh, backup power for 3 hours. It has the advantages of light weight, long service life and high power. It also causes less pollution
Functions 
  • The motion sensor is capable of detecting motion when the surrounding area has a light intensity lower than 5 Lux. The motion sensor circuit will activate, and the light will automatically turn on using electricity. The light will turn off within 15 seconds if there is no one present in the area (motion detection range: 120 degrees, distance: 5 meters)
  • The operation can be tested manually (Manual Test)
Circuit Systems
  • Controlled by an 8-bit microcontroller circuit
  • A Timer Delay circuit to keep the unit operating for a few more seconds once normal power has returned
Protection Features
  • AC and DC fuse to prevent current overload
  • Surge Protection.
  • IP20 dust and water resistant
Features to Extend Battery Life
  • An innovative 3 Steps Charger
  • A Low Voltage Cut-Off to prevent the battery from draining completely
Warning Systems
  • An LED will blink 4 times every 15 seconds to indicate that there is a problem charging the battery
DOWNLOAD SPEC SHEET | SGM209CD3 |]]> The self-contained emergency light has both a motion and a light sensor to provide maximum functionality for the user for multiple use cases. During power outages the unit will provide illumination using battery power. During normal power conditions, if the surrounding area is dimmer than 5 Lux and the unit detects a person walking by, it will automatically provide illumination using mains power and will turn off automatically after 15 seconds when there is no one left in the area.

]]> MESG Series https://sunnyemergencylight.com/en/product/mesg-series/ Fri, 18 Dec 2020 10:12:45 +0000 https://sunnyemergencylight.com/product/mel-series/ Bulb • Highly efficient and super bright 9 Watts LEDs provides maximum brightness while saving on power consumption. It also offers long operational life of more than 50,000 hours Battery • Use Lithium Iron Phosphate (LiFePO4) 3.2V-6000mAh, It has the advantages of light weight, Functions • Auto Check for key components abnormalities such as the battery, bulbs, fuses, lighting circuits, and battery charging system • Auto Test schedule: 1 month every 60 seconds, 1 year every 120 minutes (according to standard TIS.021004-22), activate and deactivate functions with a remote control • The operation can be tested manually (Manual Test) • A 5-second, 30-minute or 60-minute self-test can be performed on the unit using the remote Circuit Systems • Controlled by an 8-bit microcontroller circuit • A Timer Delay circuit to keep the unit operating for a few more seconds once normal power has returned Protection Features • AC and DC fuse to prevent current overload • Surge Protection • IP20 dust and water resistant Features to Extend Battery Life • An innovative 3 Steps Charger • A Low Voltage Cut-Off to prevent the battery from draining completely • Continuous monitoring and checking system for the battery charging status • Battery voltage change rate monitoring system with respect to time (dv/dt) Warning Systems • Alert for device not ready for use • Alert for AC input not connected to the device and notification for rectifier circuit malfunction • An LED will blink 3 times every 15 seconds to indicate that the system performs an automatic battery test (Auto Test) and detects that the backup lighting emergency duration is less than 120 minutes (Battery Fail) • An LED will blink 4 times every 15 seconds to indicate that there is a problem charging the battery • An LED will blink 5 times every 15 seconds to indicate that an abnormality in the lighting system]]> The emergency light comes with an Auto Check system that continuously monitors the performance of the device and automatically alerts any abnormalities in key components such as the battery, bulbs, fuses, lighting circuits, and battery charging system. It provides notifications when the device is not ready for use, ensuring confidence in its operation. In the event of a sudden power outage caused by electrical disturbances, it utilizes a lightweight Lithium Iron Phosphate (LiFePO4) battery that offers long service life, high energy output, and minimal environmental impact. The battery charging system incorporates a new innovation called the 3 Steps Charger (patent number 15955), surpassing other charging systems, to ensure complete protection during the battery charging process. The housing is made of 1mm thick Electro-Galvanized steel sheet, coated with two-tone modern and aesthetically pleasing colors. It has a compact and sleek design, and coated with Epoxy powder and Stove Enamel system to provide excellent protection against metal corrosion.

]]> TM Series https://sunnyemergencylight.com/en/product/tm-series/ Tue, 27 Oct 2020 06:51:07 +0000 https://sunnyemergencylight.com/product/self-contained-emergency-light-luminaires-2/
  • Highly efficient and super bright 9 Watts LEDs provides maximum brightness while saving on power consumption. It also offers long operational life of more than 50,000 hours
    • Battery
    • Use Lithium Iron Phosphate (LiFePO4) 3.2V-6000mAh, backup power for 3 hours. It has the advantages of light weight, long service life and high power. It also causes less pollution
    Functions
    • The system is operated through a remote control, allowing users to set the timer for activation. The available options for setting the timer are 1, 2, 3, 6, and 12 hours. Once the device has been running for the designated time, the light bulb will automatically turn off (Timer Function)
    • The operation can be tested manually (Manual Test)
    Circuit Systems
    • Controlled by an 8-bit microcontroller circuit
    • A Timer Delay circuit to keep the unit operating for a few more seconds once normal power has returned
    Protection Features
    • AC and DC fuse to prevent current overload
    • Surge Protection
    • IP20 dust and water resistant
    Features to Extend Battery Life
    • An innovative 3 Steps Charger
    • A Low Voltage Cut-Off to prevent the battery from draining completely
    • Continuous monitoring and checking system for the battery charging status
    Warning Systems
    • An LED will blink 4 times every 15 seconds to indicate that there is a problem charging the battery
    • Alert for device not ready for use
    • Alert for AC input not connected to the device and notification for rectifier circuit malfunction
    ]]>     The emergency lighting that can be more than just a backup power source when the electricity goes out, but also utilizes the bulbs from the device to provide illumination from normal electricity when the power is not out. This can be controlled via a remote control, and users can set a timer function to activate it for up to 12 hours. Once the set time is complete, the light bulb will automatically turn off. The emergency lamp uses high-quality LED bulbs with a lifespan of over 50,000 hours. The housing is made of heat-resistant ABS plastic.

    ]]>         EDL Series https://sunnyemergencylight.com/en/product/edl-series/ Tue, 27 Oct 2020 06:29:58 +0000 https://sunnyemergencylight.com/product/emd-series-emergency-light/
  • Automatically charges the battery safely with built-in Constant Voltage & Current Limiter circuits.
  • Equipped with a Battery Low Voltage Cut-Off to extend the life of the battery.
  • Equipped with an Under Voltage Protection circuit, the unit will activate automatically when the input current is between 140 – 160 Vac.
  • The unit has a Remote Testing function.
    • Tests lasting 5, 30 and 60 seconds can be activated remotely as well as aborted. Equipped with an Automatic Self-Testing System that will perform a self-test for 30 minutes every 30 days.
  • Equipped with status warnings and alarms
    • When the battery has less than 30 minutes of charge remaining, the LED will blink 3 times in a row every 2 seconds.
    • If there is problem charging the battery the LED will blink 4 times in a row every 2 seconds.
    • If the Low Voltage Cut-Off circuit is about to activate the LED will blink once every 2 seconds.
    • DOWNLOAD SPEC SHEET | EDLS09-3C | EDLS09-3R | EDLT09-2C | EDLT09-3R |]]>     The newly designed EDLS Series self-contained emergency downlight resembles a regular downlight and is perfect for exposed installations on recessed ceiling of offices, buildings and residents. The beautiful and modern design will enhance the look of any buildings. Using high-quality 9 Watts LEDs providing operational life of more than 50,000 hours. Equipped with an innovative 3 Steps Charger (patent number 15955) to prolong battery life and prevent battery damage. The casing is produced from 1mm thick Electro-Galvanized steel coated with Epoxy powder and special chemicals to prevent any rust from forming. The EDLS09-2R self-contained emergency downlight has undergone continued innovation to give maximum value and functions to the users, as can be seen in the feature list.

    The newly designed EDLT09-3C self-contained emergency downlight resembles a regular downlight and is perfect for exposed installations on ceilings. It has a beautiful and modern design as well extra functions not available in other emergency downlights for maximum user value. During power outages the unit will automatically provide illumination using battery power. During normal power conditions the user can also turn on the light using the switch installed at a desired location. The Timer function can also be set for the unit to turn off automatically after 1, 2, 3, 6 or 12 hours, this timer can be cancelledat any time if the use desires. The casing is produced from 1mm thick Electro-Galvanized steel coated with Epoxy powder and special chemicals to prevent any rust from forming. The EDLT09-2C self-contained emergency downlight has undergone continued innovation to give maximum value and functions to the users, as can be seen in the feature list.

    ]]>         SN Series https://sunnyemergencylight.com/en/product/sn-series/ Tue, 27 Oct 2020 05:26:31 +0000 https://sunnyemergencylight.com/product/sn-seriesself-contained-emergency-light-luminaires/
  • Having LED lifetime of over 50,000 hours.
  • Lasting longer than 2.0/7.0 hours.
  • Automatically recharged with constant voltage and limited current.
  • Battery discharge protection circuit prolongs the battery life.
    • DOWNLOAD SPEC SHEET | SN203NC7 | SN209NC2 |]]>     The Self-Contained Emergency Light Luminaires SN Series uses LED lamps for lighting. The emergency light will work automatically in case of power failure and after power resumes. It also has a charging system that helps prolong the battery life. The case is made from ABS plastic which has impact toughness, fracture toughness and corrosion resistance.

    ]]>         CU-R Series https://sunnyemergencylight.com/en/product/cu-r-series/ Tue, 27 Oct 2020 04:04:21 +0000 https://sunnyemergencylight.com/product/cu-r-seriesself-contained-emergency-light-luminaires/
  • • Having LED lifetime of over 50,000 hours • Automatically recharged with constant voltage and limited current • Battery overcharge protection circuit prevents overcharge which is the cause of battery swelling • Battery discharge protection circuit prolongs the battery life • Under voltage protection circuit allows the unit to automatically activate the emergency light in case any fault occurs in the main power distribution system or in case of power failure (140-160VAC) • Allowing testing with a remote control • Automatically enabling a 30 minutes test every 30 days (The Auto Test can be disabled) • Having a battery charging reminder with voice alert (Battery Checker)
    • ]]>     Emergency lights that support recessed mounting enhance the aesthetics
    of buildings and spaces. The heads of the emergency light fixtures can
    independently adjust the direction of the emergency light to the desired
    area using LED MR16, GU5.3 bulbs with a voltage of 12 volts and a power
    rating of 9 watts, with a total of 2 heads for providing bright light.
    The device is controlled by the microcontroller. Thus, it can be activated
    by either pressing the Function Test button on the device or by remote
    testing.
    The housing is made with 1 mm. thick Electro-Galvanized steel sheets
    coated with Epoxy powder and stove enameled to help protect from any
    possible rust

    ]]>         CU Series https://sunnyemergencylight.com/en/product/cu-series/ Thu, 22 Oct 2020 09:13:41 +0000 https://sunnyemergencylight.com/product/cu-seriesself-contained-emergency-light-luminaires/
  • Having LED lifetime of over 50,000 hours.
  • Automatically recharged with constant voltage and limited current.
  • Battery overcharge protection circuit prevents overcharge which is the cause of battery swelling.
  • Battery discharge protection circuit prolongs the battery life.
  • Under voltage protection circuit allows the unit to automatically activate the emergency light in case any fault occurs in the main power distribution system or in case of power failure (140-160VAC).
  • Allowing testing with a remote control
  • Automatically enabling a 30 minutes test every 30 days. (The Auto Test can be disabled.)
  • Having a battery charging reminder with voice alert (Battery Checker).
    • DOWNLOAD SPEC SHEET | CU209CD4 | CU209CD6 | CU212CD3 | CU212CD4 |]]>     The Self-Contained Emergency Light Luminaires CU Series uses LED lamps for lighting. The device is controlled by the microcontroller. Thus, it can be tests by remote testing. The front panel is made from ABS UL94 V-0 plastic which has high heat resistance, impact toughness, fracture toughness and corrosion resistance. The rear panel which is used for mounting and housing battery is made from 1.0 mm thick Electro-Galvanized steel sheet and finished with epoxy powder coating and stove enamel which can effectively prevent rust.

    ]]>         SG Series https://sunnyemergencylight.com/en/product/sg-series/ Fri, 16 Oct 2020 07:22:28 +0000 https://sunnyemergencylight.com/product/self-contained-emergency-light-luminaires/
  • Having LED lifetime of over 50,000 hours.
  • Automatically recharged with constant voltage and limited current.
  • Battery overcharge protection circuit prevents overcharge which is the cause of battery swelling.
  • Battery discharge protection circuit prolongs the battery life.
  • Under voltage protection circuit allows the unit to automatically activate the emergency light in case any fault occurs in the main power distribution system or in case of power failure (140-160VAC).
  • Allowing testing with a remote control Equipped with the Auto Test function:
    • Every 1 month on the 1st day of the month at 12.00-12.30 hrs.
    • Every 6 months on the 1st day of the month at 12.00-13.00 hrs.
    • DOWNLOAD SPEC SHEET | MCU203NC2 | MCU203NC5 | MCU203NC8 | MCU206NC3 | MCU206NC5 | | MCU209NC2 | MCU209NC3 | MCU209NC5 | MCU212NC2 | MCU212NC3 |]]>     The Self-Contained Emergency Light Luminaires MCU Series uses LED lamps for lighting. The device is controlled by the microcontroller. Thus, it can be activated by either pressing the Function Test button on the device or by remote testing. The front panel is made from ABS UL94 V-0 plastic which has high heat resistance, impact toughness, fracture toughness and corrosion resistance. The rear panel which is used for mounting and housing battery is made from 1.0 mm thick Electro-Galvanized steel sheet and finished with epoxy powder coating and stove enamel which can effectively prevent rust.

    ]]>