Shop – Sunny Emergency Light https://sunnyemergencylight.com/en/ Thu, 27 Nov 2025 04:51:15 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.5 https://sunnyemergencylight.com/wp-content/uploads/2020/12/cropped-FavIcon-1.webp Shop – Sunny Emergency Light https://sunnyemergencylight.com/en/ 32 32 SL Series 6 https://sunnyemergencylight.com/en/product/sl-series-6/ Tue, 14 Nov 2023 19:21:25 +0000 https://sunnyemergencylight.com/product/sl-series-6/
  •  Highly efficient and super bright 10 Watts LEDs provides maximum brightness while saving on power consumption. It also offers long operational life of more than 50,000 hours
    • Battery
    •  Use Lithium Iron Phosphate (LiFePO4) 3.2V-2000mAh, backup power for 3 hours. It has the advantages of light weight, long service life and high power. It also causes less pollution
    Functions
    •  Auto Test schedule: 1 month every 60 seconds, 1 year every 120 minutes (according to standard TIS.021004-22), activate and deactivate functions with a remote control
    • The operation can be tested manually (Manual Test)
    • A 5-second, 30-minute or 60-minute self-test can be performed on the unit using the remote
    Circuit Systems
    •  Controlled by an 8-bit microcontroller circuit
    Protection Features
    •  AC and DC fuse to prevent current overload
    • Surge Protection
    • IP20 dust and water resistant
    Features to Extend Battery Life
    •  An innovative 3 Steps Charger System
    • A Low Voltage Cut-Off to prevent the battery from draining completely
    Warning Systems
    •  An LED will blink 3 times every 15 seconds to indicate that the system performs an automatic battery test (Auto Test) and detects that the backup lighting emergency duration is less than 120 minutes (Battery Fail)
    • An LED will blink 4 times every 15 seconds to indicate that there is a problem charging the battery (Charging Fail)
    ]]>     Exit Sign Light Surface Wall and Ceiling Mounted SL Series 6 (Slim Line-CW)

    Emergency Exit Sign Light SLS6 (Slim LIne) is designed for ceiling and wall installation. It uses SMD Low Power High Lumen LED bulbs and employs SMT technology in production. It also includes an Aluminum PCB LED panel, which can help dissipate heat, resulting in electricity savings and a long operational lifespan. The sign’s symbol display panels are constructed using layered acrylic sheets. The middle layer utilizes Transparent Acrylic, which serves as a medium for transmitting light generated by LEDs. It also uses milky white acrylic sheets with light-diffusing properties across the entire panel after extended usage, complying with TIS 2430-2552 and TIS 021004-22 standards. The housing is Aluminium Extrusion with epoxy powder coating enameled to help protect from any possible rust.

     

    Exit Sign Light Recessed Ceiling SL Series 6 (Slim Line-R)

    Emergency Exit Sign Light SLS6 (Slim Line) is designed for recessed installation. It uses SMD Low Power High Lumen LED bulbs and employs SMT technology in production. It also includes an Aluminum PCB LED panel, which can help dissipate heat, resulting in electricity savings and a long operational lifespan. The sign’s symbol display panels are constructed using layered acrylic sheets. The middle layer utilizes Transparent Acrylic, which serves as a medium for transmitting light generated by LEDs. It also uses milky white acrylic sheets with light-diffusing properties across the entire panel after extended usage, complying with TIS 2430-2552 and TIS 021004-22 standards. The housing is made with 1 mm. thick Electro-Galvanized steel sheets coated with Epoxy powder and stove enameled to help protect from any possible rust.

    ]]>         EX Series 6 https://sunnyemergencylight.com/en/product/ex-series6/ Wed, 08 Nov 2023 08:35:48 +0000 https://sunnyemergencylight.com/product/exitsign_exseries6/
  •  Highly efficient and super bright 10 Watts LEDs provides maximum brightness while saving on power consumption. It also offers long operational life of more than 50,000 hours
    • Battery
    •  Use Lithium Iron Phosphate (LiFePO4) 3.2V-2000mAh, backup power for 3 hours. It has the advantages of light weight, long service life and high power. It also causes less pollution
    Functions
    •  Auto Test schedule: 1 month every 60 seconds, 1 year every 120 minutes (according to standard TIS.021004-22), activate and deactivate functions with a remote control
    • The operation can be tested manually (Manual Test)
    • A 5-second, 30-minute or 60-minute self-test can be performed on the unit using the remote
    Circuit Systems
    •  Controlled by an 8-bit microcontroller circuit
    Protection Features
    •  AC and DC fuse to prevent current overload
    • Surge Protection
    • IP20 dust and water resistant
    Features to Extend Battery Life
    •  An innovative 3 Steps Charger System
    • A Low Voltage Cut-Off to prevent the battery from draining completely
    Warning Systems
    •  An LED will blink 3 times every 15 seconds to indicate that the system performs an automatic battery test (Auto Test) and detects that the backup lighting emergency duration is less than 120 minutes (Battery Fail)
    • An LED will blink 4 times every 15 seconds to indicate that there is a problem charging the battery (Charging Fail)
    ]]>     Emergency Exit Sign Light EXS6 (Box Light) is designed for ceiling and wall
    installation. It uses SMD Low Power High Lumen LED bulbs and employs SMT technology in production. It also includes an Aluminum PCB LED panel, which can help dissipate heat, resulting in electricity savings and a long operational lifespan. It uses milky white plastic sheets with light diffusion properties across the entire sheet after extended usage, along with lens technology to distribute light and control the direction of the LED chips, ensuring even and consistent brightness across the entire panel, in compliance with TIS 2430-2552 and TIS 021004-22 standards. The housing is made with 1 mm. thick Electro-Galvanized steel sheets coated with Epoxy powder and stove enameled to help protect from any possible rust.

    ]]>         SG-IP66 https://sunnyemergencylight.com/en/product/sg-ip66-series/ Wed, 08 Nov 2023 07:38:58 +0000 https://sunnyemergencylight.com/product/sg-ip66/ Bulb
    • Highly efficient and super bright 9 Watts LEDs provides maximum brightness while saving on power consumption. It also offers long operational life of more than 50,000 hours
    Battery
    • Use Lithium Iron Phosphate (LiFePO4) 3.2V-6000mAh, It has the advantages of light weight, long service life and high power. It also causes less pollution
    Functions
    • Auto Check for key components abnormalities such as the battery, bulbs, fuses, lighting circuits, and battery charging system
    • Auto Test schedule: 1 month every 60 seconds, 1 year every 120 minutes (according to standard TIS.021004-22), activate and deactivate functions with a remote control
    • A 5-second, 30-minute or 60-minute self-test can be performed on the unit using the remote
    Circuit Systems
    • Controlled by an 8-bit microcontroller circuit
    • A Timer Delay circuit to keep the unit operating for a few more seconds once normal power has returned
    Protection Features
    • AC and DC fuse to prevent current overload
    • Surge Protection
    • IP66 dust and water resistant
    Features to Extend Battery Life
    • An innovative 3 Steps Charger System
    • A Low Voltage Cut-Off to prevent the battery from draining completely
    • Continuous monitoring and checking system for the battery charging status
    • Battery voltage change rate monitoring system with respect to time (dv/dt)
    Warning Systems
    • Alert for device not ready for use
    • Alert for AC input not connected to the device and notification for rectifier circuit malfunction
    • An LED will blink 3 times every 15 seconds to indicate that the system performs an automatic battery test (Auto Test) and detects that the backup lighting emergency duration is less than 120 minutes (Battery Fail)
    • An LED will blink 4 times every 15 seconds to indicate that there is a problem charging the battery (Charging Fail)
    • An LED will blink 5 times every 15 seconds to indicate that an abnormality in the lighting system (Lighting Fail)
     ]]>     The emergency light fixture is equipped with a weatherproof rating of IP66, suitable for both indoor and outdoor installation within a temperature range of -15 to 75 degrees Celsius. It is designed for areas where temperature control is necessary and where it may be exposed to environmental conditions such as water droplets or dust. The housing is made of Polycarbonate Anti-Ultraviolet (PC-UV) plastic, capable of withstanding direct UV sunlight exposure and providing excellent impact resistance to prevent breakage. It also effectively shields the internal components from external heat, ensuring that it does not impact the battery and helping to extend the operational lifespan.

    ]]>         Emergency Transfer Switch https://sunnyemergencylight.com/en/product/emergency-transfer-switch/ Tue, 07 Nov 2023 01:03:38 +0000 https://sunnyemergencylight.com/product/emergency-transfer-switch/
  • Supports a 230 VAC load for emergency lamps
    • Functions
    • It can detect electrical voltage at the desired detection point and immediately supply electrical power to the emergency light bulb when it detects a power outage.
    Protection Features
    • AC fuse to prevent current overload
    • Surge Protection
    ]]>     Emergency Transfer Switch is a set of electrical power supply equipment from the CENTRAL BATTERY control unit, designed to provide emergency lighting for light bulbs.
    It can work together with regular light bulbs under normal conditions, allowing manual control of turning them on and off. However, in case of a power outage, the light bulbs will automatically illuminate through the Emergency Transfer Switch, which operates with a backup power supply at 230 volts, 50 hertz for emergency lighting situations. If the room is equipped with an Emergency Transfer Switch, the light bulbs will instantly turn on when the power goes out.

    ]]>         Lithium-Iron Phosphate Batteries https://sunnyemergencylight.com/en/product/lithium-ion-rechargable-battery/ Fri, 29 Jan 2021 09:13:25 +0000 https://sunnyemergencylight.com/product/lithium-ion-rechargable-battery/
  • No fire, No explosion, Safety in use.
  • Good high temperature performance.
  • High energy density and conversion efficiency.
  • Easy installation, easy maintenance, easy replacement for lead-acid battery.
  • Low self discharge rate.
  • High Cycle times and long service life. Environmental Friendly, without any heavy metals.
    • DOWNLOAD SPEC SHEET | LiFePO4 3.2V-2Ah | LiFePO4 3.2V-6Ah | LiFePO4 6.4V-1.2Ah | LiFePO4 12.8V-1.5Ah | LiFePO4 12.8V-4Ah]]>
  • No fire, No explosion, Safety in use.
  • Good high temperature performance.
  • High energy density and conversion efficiency.
  • Easy installation, easy maintenance, easy replacement for lead-acid battery.
  • Low self discharge rate.
  • High Cycle times and long service life. Environmental Friendly, without any heavy metals.
    • ]]>         Nickel-Metal Hydride Battery https://sunnyemergencylight.com/en/product/ni-mh/ Sat, 19 Dec 2020 09:56:12 +0000 https://sunnyemergencylight.com/product/ni-mh/ DOWNLOAD SPEC SHEET | Ni-MH 3.6V-1,800mAh | Ni-MH 3.6V-2100mAh]]> This specification governs the data of the following SUNNY Nickel-Metal Hydride Cylindrical Cell and its stack-up batteries. The data involving nominal voltage and the approximate weight of stack-up batteries shall be equal to the value of the unit cell multiplied by the number of unit cells in the battery. Nominal voltage of unit cell = 1.2V

    ]]>         EP-H Series 2 https://sunnyemergencylight.com/en/product/eph-series2/ Sat, 19 Dec 2020 07:27:12 +0000 https://sunnyemergencylight.com/product/ep-h-series-1/ Supported Load
    • Channel 1 supports a 12 Vdc load for emergency lamps
    • Channel 2 supports a 220 Vac load for emergency lamps.
    Battery
    • Lithium-ion 11.1V- 5000 mAh.
    Power Supply Duration
    • It can supply a 9 Watt load for 3 hours, a 15 Watt load for 2 hours.
    Functions
    • An automatic 30-minute test can be set to perform every 30 days. This automatic testing can be turned on or off.
    Circuit Sytems
    • Controlled by an 8 bit microcontroller circuit.
    • An Autoactivation circuit when under voltage occurs.
    • A Timer Delay circuit to keep the unit operating for a few more seconds once normal power has returned.
    Protection Features
    • AC and DC fuse to prevent current overload.
    • Surge Protection.
    Features to Extend Battery Life
    • An innovative 3 Steps Charger (Limit Current, Constant Voltage, Flip-Flop Charger).
    • A Low Voltage Cut-Off to prevent the battery from draining completely.
    Warning Systems
    • An audible alarm will sound once every 15 seconds to warn that the Low Voltage Cut-Off is about to activate.
    • An audible alarm will sound twice every 15 seconds to indicate that the battery should be charged.
    • An LED will blink 3 times every 15 seconds to warn that there is less than 30 minutes of charge left in the battery. This warning will show for 10 minutes.
    • An LED will blink 4 times every 15 seconds to warn that there is a problem charging the battery.
    DOWNLOAD SPEC SHEET | EP-HS1 |]]>     The EP-HS2 emergency power pack with transfer relay is compactly designed, perfect for hidden installations in the ceiling to provide power for emergency lights installed in or under the ceiling. The EP-HS2 power pack is special in that it can supply either a 12 Vdc or 220 Vac power supply. A switch to turn on or off the power pack can be installed at any desired location and it is also equipped with the innovative 3 Steps Charger (patent number 15955) to help extend the operational life of the battery The casing is produced from 1mm thick Electro-Galvanized steel coated with Epoxy powder and special chemicals to prevent any possible rust.

    The EP-HS2 emergency power pack with transfer relay has undergone continued innovation to give maximum value and functions to the users, as can be seen in the feature list.

    ]]>         SGM Series https://sunnyemergencylight.com/en/product/sgm-series/ Fri, 18 Dec 2020 10:36:53 +0000 https://sunnyemergencylight.com/product/mem-series/ Bulb
    • Highly efficient and super bright 9 Watts LEDs provides maximum brightness while saving on power consumption. It also offers long operational life of more than 50,000 hours
    Battery
    • Use Lithium Iron Phosphate (LiFePO4) 3.2V-6000mAh, backup power for 3 hours. It has the advantages of light weight, long service life and high power. It also causes less pollution
    Functions 
    • The motion sensor is capable of detecting motion when the surrounding area has a light intensity lower than 5 Lux. The motion sensor circuit will activate, and the light will automatically turn on using electricity. The light will turn off within 15 seconds if there is no one present in the area (motion detection range: 120 degrees, distance: 5 meters)
    • The operation can be tested manually (Manual Test)
    Circuit Systems
    • Controlled by an 8-bit microcontroller circuit
    • A Timer Delay circuit to keep the unit operating for a few more seconds once normal power has returned
    Protection Features
    • AC and DC fuse to prevent current overload
    • Surge Protection.
    • IP20 dust and water resistant
    Features to Extend Battery Life
    • An innovative 3 Steps Charger
    • A Low Voltage Cut-Off to prevent the battery from draining completely
    Warning Systems
    • An LED will blink 4 times every 15 seconds to indicate that there is a problem charging the battery
    DOWNLOAD SPEC SHEET | SGM209CD3 |]]>     The self-contained emergency light has both a motion and a light sensor to provide maximum functionality for the user for multiple use cases. During power outages the unit will provide illumination using battery power. During normal power conditions, if the surrounding area is dimmer than 5 Lux and the unit detects a person walking by, it will automatically provide illumination using mains power and will turn off automatically after 15 seconds when there is no one left in the area.

    ]]>         MESG Series https://sunnyemergencylight.com/en/product/mesg-series/ Fri, 18 Dec 2020 10:12:45 +0000 https://sunnyemergencylight.com/product/mel-series/ Bulb • Highly efficient and super bright 9 Watts LEDs provides maximum brightness while saving on power consumption. It also offers long operational life of more than 50,000 hours Battery • Use Lithium Iron Phosphate (LiFePO4) 3.2V-6000mAh, It has the advantages of light weight, Functions • Auto Check for key components abnormalities such as the battery, bulbs, fuses, lighting circuits, and battery charging system • Auto Test schedule: 1 month every 60 seconds, 1 year every 120 minutes (according to standard TIS.021004-22), activate and deactivate functions with a remote control • The operation can be tested manually (Manual Test) • A 5-second, 30-minute or 60-minute self-test can be performed on the unit using the remote Circuit Systems • Controlled by an 8-bit microcontroller circuit • A Timer Delay circuit to keep the unit operating for a few more seconds once normal power has returned Protection Features • AC and DC fuse to prevent current overload • Surge Protection • IP20 dust and water resistant Features to Extend Battery Life • An innovative 3 Steps Charger • A Low Voltage Cut-Off to prevent the battery from draining completely • Continuous monitoring and checking system for the battery charging status • Battery voltage change rate monitoring system with respect to time (dv/dt) Warning Systems • Alert for device not ready for use • Alert for AC input not connected to the device and notification for rectifier circuit malfunction • An LED will blink 3 times every 15 seconds to indicate that the system performs an automatic battery test (Auto Test) and detects that the backup lighting emergency duration is less than 120 minutes (Battery Fail) • An LED will blink 4 times every 15 seconds to indicate that there is a problem charging the battery • An LED will blink 5 times every 15 seconds to indicate that an abnormality in the lighting system]]> The emergency light comes with an Auto Check system that continuously monitors the performance of the device and automatically alerts any abnormalities in key components such as the battery, bulbs, fuses, lighting circuits, and battery charging system. It provides notifications when the device is not ready for use, ensuring confidence in its operation. In the event of a sudden power outage caused by electrical disturbances, it utilizes a lightweight Lithium Iron Phosphate (LiFePO4) battery that offers long service life, high energy output, and minimal environmental impact. The battery charging system incorporates a new innovation called the 3 Steps Charger (patent number 15955), surpassing other charging systems, to ensure complete protection during the battery charging process. The housing is made of 1mm thick Electro-Galvanized steel sheet, coated with two-tone modern and aesthetically pleasing colors. It has a compact and sleek design, and coated with Epoxy powder and Stove Enamel system to provide excellent protection against metal corrosion.

    ]]>         Fire Host Sign https://sunnyemergencylight.com/en/product/special-order-exfh/ Wed, 28 Oct 2020 07:45:55 +0000 https://sunnyemergencylight.com/product/%e0%b8%aa%e0%b8%b4%e0%b8%99%e0%b8%84%e0%b9%89%e0%b8%b2%e0%b8%aa%e0%b8%b1%e0%b9%88%e0%b8%87%e0%b8%9c%e0%b8%a5%e0%b8%b4%e0%b8%95%e0%b8%9e%e0%b8%b4%e0%b9%80%e0%b8%a8%e0%b8%a9-exfh/
  • Uses high power 20/60 Watts LED for illumination.
  • The LED provides more than 50,000 hours of operational life.
  • Operate for 2.0/4.0 hours on backup time.
  • Automatically charges its battery with circuits to regulate a constant voltage and limit the current.
  • Equipped with a circuit to prevent overcharging of the battery, which can cause battery swelling.
  • A Low Voltage Cut-Off to prevent the battery from draining completely, extending the battery life.
    • DOWNLOAD SPEC SHEET | EXFH-1S | EXFH-3S |]]>     The EXFH Series illuminated fire-fighting equipment sign can be installed on walls. The unit uses SMD Low Power High Lumen LEDs with SMT technology that consumes much less power than fluorescent bulbs and provide a much longer operational life. Equipped with a Sealed Lead-Acid maintenance-free battery that can provide emergency power for up to 4 hours. The sign panel is made from frosted acrylic that spreads the light evenly. The casing is produced from 1mm thick Electro-Galvanized steel coated with Epoxy powder and special chemicals to prevent any possible rust.

    ]]>