CU-IP66 Series
สินค้า / โคมไฟฉุกเฉินรุ่นกันน้ำกันฝุ่น IP66 / CU-IP66 Series
Weatherproof Self-Contained Emergency Light Luminaires
The Self-Contained Emergency Light Luminaires CU uses SMD LED lamps for lighting. The device is controlled by the microcontroller. Thus, it can be activated by either pressing the Function Test button on the device or by remote testing. The hosing is made from Grade 304 stainless steel protected against jets of water and dust tight. certified by Electrical and Electronics Institute for IP 66 standard.
Technical Specifications
Mode of Operation | Non-Maintained |
Input Voltage | 220 VAC / 50Hz ± 10% |
Output Voltage | 12VDC |
LED Lamp Power | 9W, 12W / Bulb |
Color Temperature | 6,000k ± 250k 3,000k ± 250k |
Rated Beam Angle | 50Deg |
Battery Type / Size | Sealed Lead-Acid Maintained Free 12V 2.9Ah, 12V-5.0Ah, 12V-7.0Ah |
Protections | • AC,DC Fuse. • Battery Low Voltage Cut-Off • Surge Protection |
Testing Systems | • Automatic Testing • Manual Testing or Remote Testing |
Charging Mode | Constant Voltage & Limit Current |
Charging Current | 290mA., 500mA., 700mA. |
Charging Time | 10-15 Hrs. |
Backup Time | 2.0, 3.0, 5.0 Hrs. |
Housing | Grade 304 stainless steel |
Dimensions (LxWxH) | 270 x 90 x 250 mm. |
Weight | 3.41-4.42 Kg. |
IP Rating | 66 |
Features
- Having LED lifetime of over 50,000 hours.
- Automatically recharged with constant voltage and limited current.
- Battery overcharge protection circuit prevents overcharge which is the cause of battery swelling.
- Battery discharge protection circuit prolongs the battery life.
- Under voltage protection circuit allows the unit to automatically activate the emergency light in case any fault occurs in the main power distribution system or in case of power failure (140-160VAC).
- Allowing testing with a remote control
- Automatically enabling a 30 minutes test every 30 days. (The Auto Test can be disabled.)
- Having a battery charging reminder with voice alert (Battery Checker).
Indicators
LED AC. | Indicating input status |
LED Charge/Full | ndicating charging status |
LED On | Indicates ready for use status. |
LED 5 sec | Indicating that the 5 seconds test is enable |
LED 30 mins | Indicating that the 30 minutes test is enable |
LED 60 mins | Indicating that the 60 minutes test is enable |
Switch On/Off | For turning on/off the light (not plugged in) |
Switch Off | ใช้ ปิด หลอดไฟ (ขณะไม่ได้เสียบปลั๊กไฟ) |
IR receiver | An infrared receiver |
Dimensions (mm)
